LUXURY LINER PRO™ SHEET - MLV + FOAM - 9 sqft Mass Loaded Vinyl

Description

Luxury Liner Pro Mass Loaded Vinyl Infused With Closed Cell Foam (24" X 54") = 9 sq ft. Sheets
*MADE IN THE USA*
Luxury Liner Pro is our best automotive noise and thermal barrier. Road noise, especially the high speeds of the Interstate travel, can be enough to distort any car audio sound system and even prevent casual passenger conversation.
This is a high R-value flexible mass loaded vinyl fused with a high density closed cell foam layer. The two components are permanently bonded together and are highly water resistant. Apply on top of Damplifier Pro, Damplifier or Spectrum to reduce airborne sound waves and thermal transfer. Luxury Liner Pro is water, mold, mildew, and fire resistant and meets or exceeds all automotive, marine, and rail safety standards.
Typically installed on top of Damplifier Pro, Damplifier or Spectrum in these areas:
Door Skins
Floor
Firewall (cabin side)
Trunk
Wheel Wells (With extra strength adhesives or bolts)
Adhesives
Second Skin High Temp Spray Adhesive  (Foam Side - 1 can/4 sheets)
Second Skin's Super Strong Double Sided Tape (Foam or Vinyl Side)
HH-66 Contact Cement (Vinyl Side)
Industrial Strength Velcro (Foam Side)
Fasteners such as Screws/Pop Rivets
Specifications:
Sheet size =  24" x 54" (9 sq. feet)
Thickness =  Approximately 3/8"
Mass/Area = 1.2 lbs. per sq foot
Total weight per sheet = 12 lbs. per sheet
Thermal range = -20°F to +180°F *Recommended installation at least 2" from heat source*.
**NOTE** Due to the weight of this product, it may be difficult to install to the underside of horizontal surfaces such as a ceiling. We recommend Heat Wave Pro or Mega Zorbe  as an excellent alternative.
Luxury Liner Pro meets ROHS compliance standards which is an EU standard restricting the use of 10 hazardous substances.
Noise Reduction Uses...
Luxury Liner Pro is typically installed on top of a CLD like Damplifier, Damplifier Pro or Spectrum to filter out the most difficult airborne sound waves. LLP insulates for both noise and temperature extremes.
FAQ
What is Luxury Liner Pro?
Luxury Liner Pro is a mass loaded vinyl with a closed cell foam noise and heat Barrier - MLV/CCF.
Which side of Luxury Liner Pro does the adhesive get applied to?
LLP is installed with the soft grey foam side down (facing the noise source). Second Skin Contact Adhesive or Super Strong Double Sided Tape  is applied to the foam side.
What is the difference between Luxury Liner and Luxury Liner Pro?
Luxury Liner and Luxury Liner Pro share a very similar heavy vinyl barrier.  Luxury Liner Pro is a 1 lb PSF vinyl barrier bonded to a water resistant closed cell foam. Luxury Liner is a mass loaded vinyl with no foam backing.
Sound Transmission Loss - Luxury Liner Pro Mass Loaded Vinyl 1 lb/ft² + Closed Cell Foam:
(Sound Transmission Loss, in dB, Frequency in Hz)
Frequency (Hz)
125
250
500
1000
2000
4000
Sound Transmission Loss (dB)
20
21
25
28
32
42